xbee

Jpeg

13 Oct: How to Make your Line Following Robot Faster?

Introduction Introducing Line Following Robot with the PD controller. I'm sure most of you guys are familiar with line following robot. But for this tutorial, I will show you an interesting method that we can use with the robot, where we will apply a PD (Proportional and Differential) controller to it, making the robot faster and less wobbly. Now let's go through this together to learn about how this robot was built. =) Hardware Required CT UNO XBEE PRO STARTER...
zzstack2

29 Aug: Using Cytron XBee Shield

Introduction Cytron XBee Shield (SHIELD-XBEE) is an Arduino compatible shield which is compatible with Arduino UNO, Arduino Duemilanove, Arduino Mega, Arduino Leonardo and possibly other pin compatible main boards. XBee Shield is compatible with XBee Modules and other XBee Compatible footprint module such as BlueBee, XBee WIFI etc. * Do take note if you are using Arduino Leonardo, XBee module is not configurable from computer as Arduino Leonardo does not have USB to UART chip....
062514_0901_RecoveringY3.jpg

25 Jun: Recovering Your XBee

If you are familiar with XBee, you might have experience of the module does not response to your X-CTU or Terminal program or microcontroller. Yup, for unknown reason, XBee module might be DEAD :) But you can revive it by doing recovery. We have been successfully in saving: XBee series 1 (802.15.4) XBee Pro series 1 (802.15.4) XBee series 2 XBee WiFi S6 XBee WiFi S6B But don't get me wrong, not all dead XBee can be...
MC40A Xbee WiFi

19 Apr: Remote Mobile Robot with XBee-WiFi (Android)

By combining these two tutorial (1) Remote Mobile Robot with XBee-WiFi and (2) Xbee WiFi in Soft AP Mode, we can have a Remote Mobile Robot with XBee-WiFi (Android). HARDWARE 1. MC40A (link). 2. UIC00B - Programmer (link). 3. SPG10-150K (link). 4. Motor Bracket (link). 5. Castor (link). 6. Battery (link). 7. Xbee WiFi (link). 8. Xbee Starter Kit Without Module (link). 9. USB Mini Cable (link). ANDROID APPS WiFly Remote is a very suitable app...
120312_0558_GettingStar16.jpg

03 Dec: Getting Started with Arduino – Fio

Good! You are here because you wanted to use Arduino. 1st thing 1st, you will need the necessary tools to get started, and this guide is meant for Arduino Fio Arduino Main Board (There are plenty of Arduino main board in the market) USB cable and UC00A Rev2.0 for loading program. Some Arduino Main board comes with the USB cable, some not :) 2 units of XBee Series 1 module (for wireless program loading) SKXBee...