This guide will show you how to control the micro servo motor connected to the servo port on your Maker Uno RP2040 using the Arduino programming language...
This tutorial is application of MD10POT motor driver that can be use directly from the board without programming. The turntable is produce using 3D Printing method...
If you use a micro:bit and want to control a bigger motor, you can use external motor driver with higher specification. In this tutorial, I'm using MD13S together with REKA:BIT.....
It is a bit difficult to access the GPIO pin on the Raspberry Pi 400. By using Maker HAT Base, we can easily make the wiring connections. For this video I will try to do a simple testing, controlling ..
As mentioned in Part 1, you shouldn’t have a problem completing your robot if you get a “ready-to-use” robot or the building kit because most of the time you will be provided with a ....