I have been given a task to build an attendance system for staff. The requirements are quite straight-forward. It needs to be standalone (without computer), fingerprint is preferred, record real time and the record should be in SD card. 1.0
Enc Introduction This tutorial is to verify or count the output pulses from the quadrature encoder type of motor by using arduino. Hardware requirements -CT UNO
Hardware 3-Axis Accelerometer ADXL335 CIKU USB Mini B Cable (2.0) LCD Keypad Shield Jumper Wire Software Please refer to “Getting Started with CIKU” tutorial. Suggested Reading Measuring Tilt Angle with Gyro and Accelerometer Introduction Accelerometers measure acceleration (measure in g), often
HARDWARE 1. CIKU board (link). 2. USB MiniB Cable (2.0) (link). 3. LCD Keypad Shield (link). SOFTWARE Please refer to "Getting Started with CIKU" tutorial. CIKU LCD LIBRARY FUNCTION Below is a list for basic LCD function that you can
This tutorial will show you how to test your cube servo using just your cube servo, Arduino Uno, Cytron G15 shield, and LCD keypad shield. All the best!!
Nowadays, FM radio frequency had already become common for communication use. It use for data transfer, Medical treatment, cosmetic treatment and more. Radio frequency (RF) is a rate of oscillation in the range of around 3 kHz to 300 GHz, which corresponds to the frequency of radio waves, and
The Arduino main boards such as Arduino-Deumilanove (Arduino-Due) which embedded with Atmel microcontrollers are quite popular due to its easy-to-use programming environment. Therefore, by interface Arduino main board with MDS40A, we easier to control the DC motors if compare to PIC microcontroller. In addition, further adding an Arduino-LCD Keypad Shield can help us to control the DC motor that connected to MDS40A with the 6 momentary push buttons (built-in push buttons on LCD keypad shield including 1 Reset button) and also display some useful message by programming.
Pinguino+Arduino LCD Keypad Shield