Tutorial Search - Tag - grove

Read Sensor Value

This guide will show you how to read the analog sensor value from Grove Port or GPIO breakout...

Read Sensor Value

This guide will show you how to get reading from analog and digital sensor using Maker Uno RP2040 and Arduino IDE. It also briefly explains how to use the Grove ports...

Read Sensor Value

This guide will show you how get reading from Analog and Digital sensor...

Lesson 7 : Motor Speed Controller

In this tutorial we would like to see how to control the motor speed via the Maker Nano RP2040 and Grove Wifi..

Lesson 5 : Temperature Sensor

A simple tutorial on temperature sensor with Maker Nano RP2040..

Lesson 4 : Analog Input

A simple analog input for Maker Nano RP2040..

Lesson 1 : Getting Connected

In this lesson we shall see how to connect the Maker Nano RP2040 + ESP8266 Grove Wi-Fi to the new Blynk..

Measure The Ambient Temperature With Raspberry Pi Pico And Grove Temperature Sensor Using Arduino IDE

VideoHardware PreparationFor this tutorial we will need the following componentsDCIM\101MEDIA\DJI_0277.JPGRaspberry Pi Pico Microcontroll....

Interfacing Maker Nano RP2040 with Grove LED Bar and Grove Slide Potentiometer

 Video Hardware PreparationThe hardware setup for this tutorial is as shown below Maker Nano RP2040: Simplifying Projects with Raspberry Pi R....

Monitor Soil Moisture With Maker Nano RP2040 And Maker Soil Moisture Sensor

 Video Hardware PreparationThis are the list of items used in this tutorial.Maker Nano RP2040: Simplifying Projects with Raspberry Pi RP2040Grove Sh....

What Is The Air Quality Inside Your Room

 Video Hardware PreparationThis is the list of items used in the video.Maker Nano RP2040: Simplifying Projects with Raspberry Pi RP2040Grove Shield for Ar....

Maker Uno Portable GPS With DHT 11

 Video Hardware PreparationThis is the list of items used in the video.Maker UNO: Simplifying Arduino for {Education}Base Shield V2NEO-M6 GPS and mi....

What is the oxygen level in your room?

 Video Hardware PreparationThis is the list of items used in the video.Maker UNO: Simplifying Arduino for {Education}Base Shield V2Grove - O....

Maker UNO DHT11 Alphanumeric Display

In this tutorial, it is demonstrated how to display the DHT11, temperature and humidity value on the alphanumeric display using Maker Uno.....

K-Type Thermocouple With Maker UnoX And Blynk

In this simple video, it is demonstrated how to interface a K-Type thermocouple with Maker UnoX and display the temperature value on the 16x2 LCD and also using Blynk.....