The TCS3200 color sensor uses a TAOS TCS3200 RGB sensor chip to detect color. It contains four white LEDs that light up the object in front of it. There are four controllable white color LEDs for natural lighting of the object. This tutorial will show you the basic operation on how to use this sensor.
Last Updated on 30 June 2017 This article is written by internship student Tan Khim Huang INTRODUCTION The AT407 tilt…
This vibration sensor module is compatible with any microcontroller that has digital input. Of course popular microcontroller such and PIC, Arduino, Raspberry Pi is compatible. Direct interface is essential to use this sensor. This tutorial will show you the basic operation of how to use this sensor.
This tutorial shows how to get start with IR Distance Click using Arduino Uno.
The LM35 temperature sensor is an integrated circuit sensor that can be used to measure temperature with an electrical output proportional to the temperature in Celsius. This tutorial will show you the basic operation on how to use this sensor.
Photosensitive resistor module(SN-LIGHT-MOD) is most sensitive to environmental light intensity. This SN-LIGHT-MOD is generally used to detect the ambient brightness and light intensity.This tutorial will show you the basic operation on how to use this sensor.
Conventional way to upload code into Arduino board is by using a USB cable. In this post, I am going to show you how to upload the code into Arduino Yún board by using WiFi.