3D Printing

Real-Time IoT Room Monitoring on Maker Pi Pico Using pyRTOS

Real-Time IoT Room Monitoring on Maker Pi Pico Using pyRTOS

Overview     In this project, we’re going to build a device that can monitor a room’s temperature, humidity and…
BLTouch Installation for Ender 3 with 32-bit V4.2.2 Board

BLTouch Installation for Ender 3 with 32-bit V4.2.2 Board

BLTouch is a popular tool to perform Auto Bed Leveling for 3D Printer. This tutorial shows the detailed steps to…
Firmware Update for 32-bit Controller Board on Ender-3, PRO, or V2

Firmware Update for 32-bit Controller Board on Ender-3, PRO, or V2

If you get an Ender-3 Ender-3 PRO Ender-3 V2  from Cytron Technologies, it should come with a 32-bit Motherboard, from…
FFF/FDM 3D Printer Bed Leveling Guide

FFF/FDM 3D Printer Bed Leveling Guide

Listen to the audio article: … “Bed Leveling could be the most effective problem-solving technique used in FFF/FDM 3D printers.”…
Build a Hungry Robot using REKA:BIT in 1 minute

Build a Hungry Robot using REKA:BIT in 1 minute

Introduction We modified a bit the original version of Hungry Robot to make it easier to build using REKA:BIT. ?…
Design 3D Model Using TinkerCAD and Print

Design 3D Model Using TinkerCAD and Print

Design a 3D model from scratch using TinkerCAD and print it!
3D Print Lithophane for Hari Raya Aidilfitri

3D Print Lithophane for Hari Raya Aidilfitri

Create a 3D image using a lithophane.
3D Printing Pelita Raya

3D Printing Pelita Raya

Introduction Since it’s dangerous to use a real to light up the Pelita at my house, I decided to print…
Tutorials of Cytron Technologies Scroll to Top