In this tutorial, a project on creating the wireless communication in between SK28A and BBFuino was implemented by using two RF-TRX-2.4Gs.
The output signal of Digital Infrared Sensor is needed to be pull high as it is NPN output. The module will output a HIGH if no object is detected and a LOW if an object is detected. In this tutorial, you are going to learn on how to use the BBFuino and SK28A to control SN-E18-B03N1.
In this tutorial (by taking Cytron Technologies DIY project as an example), you will learn on how to:
>> Installing the MPLAB X IDE and MPLAB XC8 Compiler
>> Adding the source file to MPLAB X project
>> Convert the MPLAB v8 project to MPLAB X project
>> Build the codes and load to the targeting device
Find Us on Facebook