Bukit Mertajam, Penang

Getting Started With Favoriot IoT Platform Using Raspberry Pi

Introduction

FAVORIOT offers an IOT platform specifically designed for any Internet of Things (IoT) projects. The platform is developed to support the integration of data from sensors and actuators on the internet. Collecting and storing data from IOT devices become much easier.

This tutorial will show you how to get start with Favoriot using Raspberry Pi. Before that, you might need to read following tutorial first:

  1. Getting Started With Maker pHAT
  2. Displaying Sensor’s Data On Blynk App Using Raspberry Pi

Video

This video will show you how to get started with Favoriot IoT platform using Raspberry Pi.

Untuk versi bahasa Melayu, sila rujuk link dibawah.

Hardware Preparation

Below is the list item used in the video.

Wiring connection table

Raspberry Pi DHT22 Sensor
5V VCC
GND GND
18 DAT
Pi Favoriot Connection

Sample Code

This is sample code used in the video. Please replace “YOUR FAVORIOT APIKEY” and “Your Device Developer ID” with yours.

Thank You

References:

  1. Getting Started With Maker pHAT
  2. Displaying Sensor’s Data On Blynk App Using Raspberry Pi
  3. Raspberry Pi Lesson: Send Data Favoriot

Thanks for reading this tutorial. If you have any technical inquiry, please post at Cytron Technical Forum.

Related Posts

Leave a comment