Bukit Mertajam, Penang

Selfie with Raspberry Pi

Introduction

In this lesson, we will learn on how to use a push button to take a selfie using a Pi Camera. It’s simple and easy project to do.  

Hardware Preparation

This tutorial use :

  1. Raspberry Pi
  2. Maker pHAT
  3. USB Micro B Cable
  4. Raspberry Pi 8MP Camera Module

You can make the hardware connection based on the diagram and table below.

Figure 1 : Hardware connection.

Sample Code

This is the sample code used for this tutorial. Try it!

Thank you

Thank you for reading this tutorial and we hope it helps your project development. If you have any technical inquiry, please post at Cytron Technical Forum.

Related Posts

Comments (1)

Macam mana nak attach rpi 5 inch lcd dengan setup macam ni?

Leave a comment