Introduction Good day, The Advanced Auto-Calibrating Line Sensor (LSA08) is capable to operate in three different modes: digital, analog, and serial. In this tutorial, I am going to show you how to make a line following robot using LSA08 in serial mode with Arduino Uno board.
Introduction Good day, The Advanced Auto-Calibrating Line Sensor (LSA08) is capable to operate in 3 different modes: digital, analog, and serial. In this tutorial, I am going to show you how to make a line following robot using LSA08 in analog mode with Arduino Uno board.
In this tutorial, we are going to built an advanced line following robot. Why I say advanced? Because normal line follower will only respond with specified/predetermined speed, however with a little trick, we can make the robot changes its speed depending on the line position.
Introduction:Good day,A line-following robot, as its name suggest, is a robot that move by following a line. It is a simple robot that could explain the concept of Autonomous Guided Vehicle (AGV) to newbie robot makers. Cytron offer two types of line sensor to aid makers in the process of building this robot: Auto-Calibrating Line Sensor Advanced Auto-Calibrating Line Sensor…
Hello everyone! In previous tutorial, we have learnt how to use Arduino IDE to create and upload firmware to ESP8266 WiFi module and make it a hello world server. But what if we want it to be more than just a hello world server?
Hello everyone! Cytron MP3 shield library has been revised that now you can do your main tasks while you are enjoying your favourite music!
Hi there, in this tutorial i would like compare 3 ultrasonic sensors that available in Cytron Technologies ! Ultrasonic sensors is a transducer that convert ultrasound to electrical signal.So what are the differences of HC-SR04 ,LV-MaxSonar-EZ and HRLV-MaxSonar-Ez ? Let check it out 😀 !